gauge cock的音標為[?ɡe?d? k?k] ，翻譯為“測壓閥（器）”。

速記技巧：將“cock”與“閥”聯系起來記，可以快速記憶。

請注意，以上內容僅供參考。更多關于 gauge cock 的信息，建議咨詢專業人士獲取。

Gauge cock 是測量儀表中的一種部件，用于控制和調節測量系統的流量或液位。它的英文詞源可以追溯到拉丁語“gaugeus”和“coccus”，意為“測量器”或“測量球”。

變化形式：

1. Gauge - 詞源同 gauge cock，表示測量或儀表。

2. Cock - 詞源同 cockle，表示公雞或雄鳥。

相關單詞：

1. Gauge tube - 測量管，用于測量液體或氣體流量。

2. Flow gauge - 流量測量儀，用于測量液體或氣體的流量。

3. Liquid level gauge - 液位計，用于測量液體容器中的液位高度。

4. Pressure gauge - 壓力表，用于測量氣體或液體的壓力。

5. Flow control valve - 流量控制閥，通過改變閥門的開度來控制流量的大小。

6. Pressure cock - 壓力開關，用于控制和調節液體或氣體壓力的設備。

7. Level cock - 液位開關，用于檢測液體容器中的液位高度。

8. Flowcock - 流量閥，用于控制流量的設備。

9. Gauge board - 儀表板，用于顯示各種測量數據的面板。

10. Gauge reading - 儀表讀數，表示測量儀表所顯示的數據或結果。

gauge cock: 測量閥

常用短語：

1. check the gauge cocks 檢查測量閥

2. turn on the gauge cocks 打開測量閥

3. tighten the gauge cocks 緊固測量閥

4. repair the gauge cocks 修理測量閥

5. adjust the gauge cocks 調整測量閥

6. clean the gauge cocks 清洗測量閥

7. replace the gauge cocks 更換測量閥

雙語例句：

1. We need to check the gauge cocks on the engine to ensure it is working properly. (檢查發動機的測量閥以確保其正常工作)

2. The water level in the tank is low, so I"ll turn on the gauge cocks to refill it. (水箱水位低，所以我會打開測量閥進行補水)

3. The gauge cocks on the carburetor need to be tightened after a long period of use. (長時間使用后，化油器上的測量閥需要緊固)

4. The engine is running rough, so I"ll adjust the gauge cocks to improve its performance. (發動機運行不平穩，所以我會調整測量閥以改善其性能)

5. The gauge cocks are clogged with dirt, so they need to be cleaned before use. (測量閥堵塞，使用前需要清洗)

6. The gauge cocks on the boiler have failed, and we need to replace them immediately. (鍋爐上的測量閥失效，我們需要立即更換)

7. The tank gauge cocks are leaking, so we need to repair them as soon as possible. (油箱上的測量閥漏油，我們需要盡快修理)

英文小作文：

Gauge cocks are an essential part of any engine or system that requires precise measurement or control. They are used to monitor and adjust various parameters such as pressure, temperature, and flow rate, ensuring that the system is operating within safe and efficient parameters.

Over time, these components can become clogged or leaky, requiring regular maintenance and repair. Keeping them clean and properly maintained can help ensure that the system operates efficiently and safely without any unexpected issues.

In addition to regular maintenance, it is also important to understand how to use and troubleshoot gauge cocks in case of an emergency or malfunction. Knowing how to access and inspect these components can help you quickly identify and resolve any issues before they become serious.